SRW115 – Sterilizer for disinfection of protective masks, 112 liters

Sterilizer for disinfection of protective masks, 112 liters

Pol Eko Logo

Article no: PE-SRW 115-skyddsmasker Category:

This product is available in: 🇸🇪, 🇳🇴, 🇩🇰.

Questions on SRW115 – Sterilizer for disinfection of protective masks, 112 liters?

Call 042-300 91 30 or email info@labteamet.com

Description

SRW115 Sterilizer for disinfection of protective masks, 112 liters

SRW115 Sterilizer Disinfection Protective masks

Sterilizers SRW Smart for disinfection of masks

All countries in the world are currently struggling with a shortage of personal protective equipment in the healthcare system.

In order to reduce these deficiencies, the German government recommends methods for the disinfection of the masks,, allowing their reuse. The published document contains recommendations for the disinfection of both: colloquially called “surgical” masks and FFP2 and FFP3 masks by using a hot air (65-70°C) for 30 minutes.

This process can be carried out with a standard drying ovens / laboratory sterilizers.

The only places where you cannot re-use a protective equipment (even sanitized) are operating rooms. However for a daily hospital duties or in stationary care, they are ideal.

According to the recommendations of the German government:

MNS masks called “surgical masks”
Purpose: to protect third parties (not the wearer), primarily to protect the patient. These masks are used in most healthcare facilities. In case of external protection in daily work in hospital wards, clinics or care facilities, reuse is possible. Personalized use is required. In case of using in an operating room or in interventional surgery, reuse is generally not possible. Disinfecting the masks is possible by using a dry heat (at 65-70°C for 30 minutes).

Respiratory masks as personal protective equipment, protecting against corona-viruses, with the filter function (masks FFP 2 and FFP 3)
Oposite to the medical face masks, these masks are used to protect the user. These masks are mandatory to protect medical personnel. Disinfecting the masks is possible using dry heat (at 65-70 °C for 30 minutes).

 

SRW115 Sterilizer Disinfection Protective masks1

SRW115 Sterilizer Disinfection Protective masks2

  • Sterilizer with fan
  • Interior: Stainless steel INOX
  • Exterior: Powder coated textured paint or INOX/G
  • Available versions:Smart
  • Solid door (windows in the door are optional)
  • Fan
  • Heating system
  • Automatic door locking during programs
  • Three ready-to-use sterilization programs, with a total of 20 program sites
  • Air vents close automatically after program start
  • Access port, memory for temperature history, open door alarm, etc.
  • Temperature range: 5°C above ambient to +250°C
  • Volume: 112 liters
  • Possible options, for description see below.

Options and accessories

Order number: */A Door with viewing window
Order number: */P INOX Stainless steel wire shelf
Order number: */PP Perforated shelf
Order number: */PW Reinforced shelf
Order number: KUW GN*/* Stainless steel bowls
Order number: QLK* Wheels
Order number: */S or */S INOX Table with castors
Order number: */ST or */S INOX Base on castors
Order number: OWW/OWW LED Interior lighting
Order number: HEPA HEPA – clean air filter
Order number: OCZ/N Non-standard access port for external sensor
Order numberLabDesk LabDesk – software
Order number: BRT/*/L or IQ/OQ/PQ Calibration and IQ, OQ, PQ qualification
Order number: */3.1 Over temperature protection 3.1 class according to DIN 12880

SRW115 Sterilizer for disinfection of protective masks, 112 liters

Technical data

TYPE: SRW 115
air convection: forced
chamber capacity [l] 1 112
working capacity [l] 112
controller microprocessor with external LCD graphic display
display 4,3″ full colour touch screen
TEMPERATURA
temperature range [°C] +5°C above ambient temperature … +250°C
temperature resolution every … [°C] 0,1
over temperature protection class 2.0 to DIN 12880 / class 3.1 (option)
CHAMBER
door type solid / door with viewing window (option)
interior acid-proof stainless steel to DIN 1.4301
housing
Smart powder coated sheet
IG Smart stainless steel linen finish
overall dims [mm] 2
width A 650
height B 850
depth C 710
internal dims [mm]
width D 460
height E 540
depth F 450
TECHNICAL DATA
shelves (standard max) 2 // 7
max shelf workload [kg] 5 25
– reinforced shelf version (PW) 3 50
max unit workload [kg] 60
– reinforced unit version (W) 4
weight [kg] 65
voltage* 230V 50Hz
nominal power [W] 2500
warranty 24 months
manufacturer POL-EKO-APARATURA
all the above technical data refer to standard units (without optional accessories)
* – 230V 60Hz, 115V 60Hz, 3P 230V 60Hz – on request
1 – working capacity of chamber can be smaller
2 – depth doesn`t include 50 mm of power cable
3 – reinforced shelf
4 – reinforced version
5 – on uniformly loaded surface

 

pdficon Produktblad SRW115 SMART
pdficon Pol-Eko komplett produktkatalog
web link globe Produktinfo SMART_SMART-PRO

LEASING / RENT / INSTALLMENT

Our collaboration with Svea means that you can quickly and easily get a proposal for financing that suits your needs Financing up to 100%. You do not have to tie up your capital. Read more about lease and insurance.

Invest now in the right equipment, to ensure your competitiveness, capacity and access to vital equipment Spread the cost over the time the equipment is used. The equipment as collateral for the financing.

Contact us today for a proposal!

Related products

Quick request

SRW115 – Sterilizer for disinfection of protective masks, 112 liters

This request is only for this product. If you want to make requests for several products at the same time, please use the “Request (multiple products)” button on the respective product page instead and collect your products under “My products” before sending your request.