Description
SRW180 – Sterilizer for disinfection of protective masks, 180 liters

Sterilizers SRW Smart for disinfection of masks
All countries in the world are currently struggling with a shortage of personal protective equipment in the healthcare system.
In order to reduce these deficiencies, the German government recommends methods for the disinfection of the masks,, allowing their reuse. The published document contains recommendations for the disinfection of both: colloquially called “surgical” masks and FFP2 and FFP3 masks by using a hot air (65-70°C) for 30 minutes.
This process can be carried out with a standard drying ovens / laboratory sterilizers.
The only places where you cannot re-use a protective equipment (even sanitized) are operating rooms. However for a daily hospital duties or in stationary care, they are ideal.
According to the recommendations of the German government:
MNS masks called “surgical masks”
Purpose: to protect third parties (not the wearer), primarily to protect the patient. These masks are used in most healthcare facilities. In case of external protection in daily work in hospital wards, clinics or care facilities, reuse is possible. Personalized use is required. In case of using in an operating room or in interventional surgery, reuse is generally not possible. Disinfecting the masks is possible by using a dry heat (at 65-70°C for 30 minutes).
Respiratory masks as personal protective equipment, protecting against corona-viruses, with the filter function (masks FFP 2 and FFP 3)
Oposite to the medical face masks, these masks are used to protect the user. These masks are mandatory to protect medical personnel. Disinfecting the masks is possible using dry heat (at 65-70 °C for 30 minutes).
- Sterilizer with fan
- Interior: Stainless steel INOX
- Exterior: Powder coated textured paint or INOX/G
- Available versions:Smart
- Solid door (windows in the door are optional)
- Fan
- Heating system
- Automatic door locking during programs
- Three ready-to-use sterilization programs, with a total of 20 program sites
- Air vents close automatically after program start
- Access port, memory for temperature history, open door alarm, etc.
- Temperature range: 5°C above ambient to +250°C
- Volume: 180 liters
- Possible options, for description see below.
Smart options
Order number: */A | Door with viewing window | |
Order number: */P INOX | Stainless steel wire shelf | |
Order number: */PP | Perforated shelf | |
Order number: */PW | Reinforced shelf | |
Order number: KUW GN*/* | Stainless steel bowls | |
Order number: QLK* | Wheels | |
Order number: */S or */S INOX | Table with castors | |
Order number: */ST or */S INOX | Base on castors | |
Order number: */W | Reinforced version | |
Order number: OWW/OWW LED | Interior lighting | |
Order number: HEPA | HEPA – clean air filter | |
Order number: OCZ/N | Non-standard access port for external sensor | |
Order numberLabDesk | LabDesk – software | |
Order number: BRT/*/L or IQ/OQ/PQ | Calibration and IQ, OQ, PQ qualification | |
Order number: */3.1 | Over temperature protection 3.1 class according to DIN 12880 |