Eppendorf 5702 - Centrifuge

Description

Eppendorf 5702 – Centrifuge

The Eppendorf 5702 family of centrifuges is designed for labs with low to medium sample throughput. They are compact in design and there are 6 different rotor options to run all types of tubes. Adapters for 8-16 tubes for the small lab, or adapters for 32-40 tubes for the slightly larger lab etc. Low noise level and ergonomic design for the best working environment.

The centrifuge is future-proof, running up to 4,400 rpm (3,000xg). Easy to use and popular centrifuge that is perfect for primary care labs, clinical labs, research labs etc.

Characteristics

Max. speed: 3,000 x g (4,400 rpm)
Very compact footprint to fit on any lab bench
Very quiet when driving to give you a good working environment
Low centrifuge for easy loading and unloading of samples
Soft start and soft brake function can be easily activated for slow acceleration and deceleration. Optimized for cell separation by gradient centrifugation.
The “At set RPM” function can easily be activated if you want the timer to start when the set speed has been reached, for reproducible spins. Otherwise, you run with the default setting where the time starts when you press start.
Possibility to lock the panel so that parameters are not changed accidentally.
Stainless steel chamber that is durable and easy to keep clean.
Electronic imbalance detector for maximum safety and durability of the centrifuge.

Ergonomics

Takes up little space, centrifuge with very compact footprint to fit on any lab bench.
Very quiet when driving, to provide you with a good working environment.
Low centrifuge, good working height for easy insertion and removal of samples.

Quality and safety

– Stainless steel chamber that is durable and easy to clean
– Imbalance detector for maximum safety
– Lockable panel to prevent accidental change of parameters
– Aerosol-tight lid available as an accessory to run hazardous samples

Temperature control

– Optimizes airflow and minimizes sample heating during run (5702)
– FastTemp function for fast pre-cooling (5702 R/RH)
– Active heating guarantees high temperature accuracy throughout the spin cycle (heating, only on 5702 RH)
– ECO shutdown is activated after 8 h if not used to reduce energy consumption and increase compressor lifetime (5702 R/RH)

Technical Specification

——————–	Centrifuge 5702	Centrifuge 5702 R	Centrifuge 5702 RH


Max. RCF	3,000 × g	3,000 × g	3,000 × g
Max. RCF with fixed-angle rotor	1900 × g	1900 × g	1900 × g
Max. RCF with swing-bucket rotor	3000 × g	3000 × g	3000 × g
Display	LCD	LCD	LCD
Speed	100 – 4,400 rpm (100 rpm steps)	100 – 4,400 rpm (100 rpm steps)	100 – 4,400 rpm (100 rpm steps)
Rotors available	6	6	6
Max. capacity	4 × 100 mL	4 × 100 mL	4 × 100 mL
Acceleration time¹⁾	≤19 s	≤20 s	≤19 s
Deceleration time¹⁾	≤19 s	≤28 s	≤29 s
Timer	0 – 99 min, with continuous run function	0 – 99 min, with continuous run function	0 – 99 min, with continuous run function
SOFT brake function	yes	yes	yes
Noise level	<52 dB(A) with Rotor A-4-38	<46 dB(A) with Rotor A-4-38	<46 dB(A) with Rotor A-4-38
Volume range	400 mL	400 mL	400 mL
Power supply	230 V, 50 – 60 Hz	230 V, 50 – 60 Hz	230 V, 50 – 60 Hz
Max. power consumption	200 W	380 W	380 W
Dimensions (W × D × H)	32 × 40 × 24 cm / 12.6 × 15.6 × 9.6 in	38 × 58 × 27 cm / 15 × 22.9 × 10.6 in	38 × 58 × 27 cm / 15 × 15 × 10.6 in
Weight w/o accessories	19 kg / 41.9 lb	35 kg / 77.4 lb	35 kg / 77.4 lb
Height (with open lid)	53 cm / 20.7 in	60 cm / 23.4 in	60 cm / 23.4 in
Cooling	non-refrigerated	refrigerated	refrigerated/heated
Temperature range	–	-9 °C to 40 °C	-9 °C to 40 °C

Max. capacity
Conical tubes	20 × 15 mL/4 × 50 mL	20 × 15 mL/4 × 50 mL	20 × 15 mL/4 × 50 mL
Blood collection tubes	36 × 13 mm/30 × 16 mm	36 × 13 mm/30 × 16 mm	36 × 13 mm/30 × 16 mm

1)Acceleration and deceleration times may vary depending on rotor, load and voltage version.

	Centrifug Eppendorf 5702 Produktblad
	Centrifug Eppendorf 5702 Produktblad – IVD version
	Eppendorf produktkatalog

LEASING / RENT / INSTALLMENT

Our collaboration with Svea means that you can quickly and easily get a proposal for financing that suits your needs Financing up to 100%. You do not have to tie up your capital. Read more about lease and insurance.

Invest now in the right equipment, to ensure your competitiveness, capacity and access to vital equipment Spread the cost over the time the equipment is used. The equipment as collateral for the financing.