Kryohandskar – TEMPSHIELD Cryo-Gloves®

TEMPSHIELD Cryo-Gloves®Kryohandskar

[ENQUIRY_BUTTON_DYNAMIC]
Artikelnr: TS-Kryohandskar Kategorier: ,

Beskrivning

Kryohandskar – TEMPSHIELD Cryo-Gloves®


CRYOGENIC PROTECTION IN ULTRA-COLD ENVIRONMENTS

  • Cryogenic protection for ultra-cold applications down to -196°C (-320°F)
  • State-of-the art materials and a multi-layered construction allow for a maximum level of thermal protection, flexibility, and dexterity which are essential features when function is important and safety is critical
  • High performance, thermal inner lining wicks moisture away from hands, maintaining comfort over extended periods
  • Safety certified to meet EU standards for CE Cat. II: EN 511, EN 388, EN 420
  • Applications: handling dry ice, low and ultra-low temperature freezers, closed cryogenic systems

Caution: Not intended for immersion in liquid nitrogen or other cryogenic liquids.

THE CURE. IT’S IN YOUR HANDS.™

A portion of profits from PINK Product Sales goes to cancer research and support services.

 

HOW TO CHOOSE THE CORRECT GLOVE FIT

Choosing the correct glove fit is essential to your safety and comfort.

  • The glove must be loose enough to shake off your hand in one motion, in the event of saturation with cryogenic fluid
  • Too tight a fit leads to thermal loss
  • Tempshield’s gloves are sized appropriately to take quick removal into account – order your true size
  • If your length and width sizes do not match, order to your width size – the cuff will cover any additional length needed

HERE’S HOW TO MEASURE YOUR HAND:

For your hand length, measure
from the fold of your wrist
to the tip of your middle finger.
For your hand width, make a fist with your dominant hand and measure the circumference below your knuckles. Do not include your thumb.

SIZE (EU)

HAND LENGTH

HAND WIDTH

S 171 mm 178–202 mm
M 182 mm 203–228 mm
L 192 mm 229–253 mm
XL 204 mm 254–278 mm
XXL 204 mm 279–304 mm
3XL 204 mm 305–330 mm

Cryogenic Safety

Anyone handling cryogenic liquids should be familiar with the hazards presented by such materials and trained in how to handle them safely. Emergency procedures should be established and rehearsed, proper training in the operation of all equipment provided and knowledge and appreciation of hazardous properties of the materials instilled. Cryogenic liquids should never be handled without proper protective gear.

Generally recommended protective apparel for handling cryogenic liquids include the following:

Proper fitting gloves*

Protective face shield or goggles

Protective apron without pockets

Pants without cuffs

Shoes without laces or spats covering shoes and area unprotected by apron

 

Proper Fitting Gloves For maximum dexterity and safety, cryogenic gloves must fit properly. Although gloves should be loose enough to allow for quick removal if necessary, a glove that is too large impairs dexterity and function. A tight glove leads to thermal loss.

 

WARNING Anyone handling cryogenic liquids should be familiar with the hazards presented by such materials and trained in how to handle them safely. Emergency procedures should be established and rehearsed, proper training in the operation of all equipment provided, and knowledge and appreciation of hazardous properties of the materials instilled. Cryogenic liquids should never be handled without proper protective gear.

CAUTION Not intended for immersion in liquid nitrogen or other cryogenic liquids.


Kryohandskar – TEMPSHIELD Cryo-Gloves®

HOW TO CHOOSE THE CORRECT GLOVE FIT

Choosing the correct glove fit is essential to your safety and comfort.

  • The glove must be loose enough to shake off your hand in one motion, in the event of saturation with cryogenic fluid
  • Too tight a fit leads to thermal loss
  • Tempshield’s gloves are sized appropriately to take quick removal into account – order your true size
  • If your length and width sizes do not match, order to your width size – the cuff will cover any additional length needed

HERE’S HOW TO MEASURE YOUR HAND:

 

For your hand length, measure
from the fold of your wrist
to the tip of your middle finger.
For your hand width, make a fist with your dominant hand and measure the circumference below your knuckles. Do not include your thumb.

 

SIZE (EU)

HAND LENGTH

HAND WIDTH

S 171 mm 178–202 mm
M 182 mm 203–228 mm
L 192 mm 229–253 mm
XL 204 mm 254–278 mm
XXL 204 mm 279–304 mm
3XL 204 mm 305–330 mm
Produktkatalog Tempshield
Selection guide Tempshield

LEASING / HYRA / AVBETALNING

Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.

Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.

Kontakta oss redan idag för ett förslag!

Facebook
Twitter
LinkedIn

Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.