Hydrolab - Water treatment - HLP Smart

Description

Hydrolab – Water treatment – HLP Smart

The HLP demineralizers are the most popular tap water powered devices that meet all the requirements of any modern laboratory in terms of demand for water suitable for analytical and instrumental purposes. Obtained water with conductivity below 0.06 µS/cm meets the requirements of: ISO 3696:1999, ASTM, CLSI, EP. The resulting water can be used for instrumental analysis AAS, ICP/MS, IC, HPLC, GC (depending on the model).

– Fed by tap water.
– Water purification levels:
– sediment pre-filter 5µm,
– integrated module (sediment-carbon-softening),
– reverse osmosis,
– double demineralization on a mixed ionex resin.
– Efficiency min. 4-4,5 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
– Tank 10 dm3.
– Obtained water may be used for instrumental analyses AAS and for general-purpose research.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.

Technical specification:

– The device works under tap water pressure.
– Water purification levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.
– Efficiency: ca 4 – 4,5 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Unattended and automated.
– Mobile water intake point – second purity class (ISO 3696:1999) – with a demi water nozzle (min. 2 m reach).
– Additional water intake point – first class (ISO 3696:1999 – with a 0,2μm microfiltration capsule) – option.
– Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
– System equipped with a 10 dm3 pressure storage tank.
– Optional replacement with a bigger tank (40 dm3, 80 dm3).
– Automated system shutdown when the tank is full.
– Maintenance procedures may be performed by the user (easy replacement of disposables).
– Min. feed water pressure: 3 bar.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.
– Can be installed by the user.
– Acid-proof stainless steel (inox) housing.
Dimensions (width x depth x height): 200x375x420 mm
Zbiornik 10 dm3: wys. 390 mm, średnica: 250 mm

Hydrolab – Vattenrening – HPL Smart

Hydrolab – Produktkatalog

Hydrolab – brochure

LEASING / RENT / INSTALLMENT

Our collaboration with Svea means that you can quickly and easily get a proposal for financing that suits your needs Financing up to 100%. You do not have to tie up your capital. Read more about lease and insurance.

Invest now in the right equipment, to ensure your competitiveness, capacity and access to vital equipment Spread the cost over the time the equipment is used. The equipment as collateral for the financing.