Capp – CAPPWash Plattvätt för mikrotiterplattor

plate washer


Artikelnr: Capp-CAPPWash-plate-washer Kategori:

Frågor om Capp – CAPPWash Plattvätt för mikrotiterplattor?

Ring 042-300 91 30 eller maila


Capp – CAPPWash Plattvätt för mikrotiterplattor

CAPPWash plate washer is an ideal elisa plate washer for small scale work. Simple, compact and inexpensive, CAPP plate washer is available in an 8-channel, a 12-channel and a 16-channel version, as well as in form of a 6-channel TubeWash – manual washer for 12x75mm test tubes.

Fitting into even the tightest budget, CAPP plate washer is a perfect alternative to dependence on department washers for washing micro plates and strips. CAPP elisa plate washer works most effectively with a vacuum source. CAPP provides a vacuum pump, suitable both for the 115V and 230V connections. CAPP plate washer can be purchased individually, as a set, including all components necessary for the set up, or with chosen components only – depending on your current lab infrastructure. Below chart shows all available components for CAPP plate washer.

CAPP elisa plate washer requires no programming nor electrical wiring connections. It is made of a high-grade stainless steel and polypropylene, making it fully autoclavable and highly resistant to aggressive chemicals.
The unique Two-in-One Design of CAPP elisa plate washer gives each tube 2 functions – delivery of the washing solution to the well and aspiration of the used solution back to the waste collection bottle. This is possible as each tube of CAPP elisa plate washer consists of an inner tube that releases the distilled water washing solution into the wells for rinsing while the outer tube vacuums away the liquid upon completion of the washing procedure.

The washing process with CAPP plate washer is as simple as it can be: Simply lower the tubes into the well then push the knob to fill and release the knob to empty. Now repeat for the desired amount of washings and move on to the next row.
CAPP elisa plate washer is suitable for all well types. The plate washer can be set to the desired depth very easily by simply adjusting the two screws found on either side of the tubes.

Capp – CAPPWash plate washer


Cat. No. Description
W-8 CAPPWash plate washer 8 channel
W-12 CAPPWash plate washer 12 channel
W-16 CAPPWash plate washer 16 channel
W-8KIT-115V CAPPWash Kit including W-8, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
W-8KIT-230V CAPPWash Kit including W-8, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
W-12KIT-115V CAPPWash Kit including W-12, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
W-12KIT-230V CAPPWash Kit including W-12, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
W-16KIT-115V CAPPWash Kit including W-16, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
W-16KIT-230V CAPPWash Kit including W-16, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)
WP-115V Vacuum pump 115V
WP-230V Vacuum pump 230V
WB-1 Bottle for washing solution, 5 liters
WB-3 Waste collection bottle, 2 liters
WB-4 Vacuum trap
W-1000 Silicon Tubing (1 meter). Recommended to order 3 meters / 6 mm inner and 9 mm outer diameter. 1,5 mm wall thickness.


Capp – CAPPWash plate washer – Produktblad
Capp  – Produktkatalog



Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.

Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.

Kontakta oss redan idag för ett förslag!

Relaterade produkter

Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.