Pol-Eko – Fume Hood, Dragskåp CompactLine DCL 1500 PP

Beskrivning

Pol-Eko – Fume Hood, Dragskåp CompactLine DCL 1500 PP

Standard equipment for fume hoods:

– structure entirely made of galvanized steel without the use of wood-based materials
– worktop at a height of 900mm made of monolithic ceramics with a raised rim with a suspended ceramic sink 280x80mm
– toughened glass window, lifted manually with counterweight, opened upwards with a lock at the height of 500 mm (max 810mm), and additionally sliding glass (right / left). The window has a system preventing the uncontrolled drop of the window
– 2 electric sockets 230V 50Hz
– 2 water spouts with valves on the BROEN front panel
– 2 x 230V 50Hz electrical sockets
– 2 x water taps with valves in the front panel
– ceramic sink 280x80mm
– illumination of the working chamber
– air-flow sensor (Schneider FM 550-A-0-E)
– window, opening upwards at 500 mm height (max 810 mm), additionally sliding glass (right/left)
– energy-saving linear LED lighting separated from the fume hood with a glass pane
– double system the back wall with exhaust slots in the upper and lower part ensuring proper extraction of vapors lighter or heavier than air without turbulence and dead zones
– safety flap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber
– full monitoring set Schneider brand) air flow velocity in the fume cupboard window compliant with the PE-EN 14175 standard
– CE Declaration of Conformity: PN-EN 14175; PN-EN 14056; PN-EN 13150

Other optional equipment:

– main switch
– anti-shock switch
– safety switch
– 400VAC IP44 socket
– additional 230VAC IP44 sockets
– 230VAC sockets inside the working chamber IP44
– Manual Protect system – battery backup of the monitoring set
– power supply control of the socket with the option of timer setting
– additional gas taps
– metal cabinet key lock under the tabletop
– explosion-proof equipment EX
– side glazing
– truss made of acid-resistant steel, on the back wall of the manipulation chamber
– inspection openings
– flexible strip brush
– ventilated under bench cabinet made of steel covered by chemically resistant epoxy paint, connected to the ventilation system of fume hood, designed for short-term storage of reagents,
– under bench cabinet for acids and alkalis made of foamed PVC,
– fire resistant under bench cabinet,
– polypropylene trays,
– 230V sockets,
– gas connections,
– automatic windows,
– main switch with safety button,
– additional media: gas valves (technical gases and flammable gases), electrical sockets,
– explosion-proof equipment (illumination, electric sockets with plug adapters)
– glazed side walls 700×500 mm, made of tempered safety glass 4 mm
– grate on the back wall made of stainless steel
– elements of the fume hood made of stainless steel EN 1.4404 (construction, internal chamber, worktop, housing)
– possibility of placing safety cabinet under the fume hood instead of a standard cabinet

CONTROLLERS

FM 550

control functions with visual and sound
alarms in case of low air flow
(in accordance with PN-EN 14175)
sash window height alarm
airflow measurement [m³/h]
fume hood illumination control

iCM 500 F
microprocessor controller
for regulation and monitoring
of fume hood face velocity [m/s]
visual and sound alarm in case of emergency
control panel with fully graphic
and numerical LC-display
throttle with high-speed actuator

iCM 500 FP
microprocessor controller for regulation
and monitoring of face volumetric air flow
rate [m³/h]
visual and sound alarm in case of emergency
control panel with fully graphic and numerical LC-display
works with Building Management System (BMS)

Automatic Sash Controller SC 500
Infrared light barrier transmitter/receiver for registering objects during the closing proces.
Foot switch for opening the sash (option).

WORKING CHAMBER FINISHING

SS variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of steel, covered with chemically resistant epoxy paint.

CR variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of 8 mm Buchtal ceramic.

PP variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, ceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of polypropylene.

LM variant

worktop – solid ceramics th. 27 – 33 mm,
with marine edge, iceramic sink (dims 280 x 80 mm)
is mounted under the worktop, internal chamber side walls
made of Max Resistance phenolic resin composite.