Beskrivning
SRW115 – Sterilisator för desinfektering av skyddsmasker, 112 liter
Sterilizers SRW Smart for disinfection of masks
All countries in the world are currently struggling with a shortage of personal protective equipment in the healthcare system.
In order to reduce these deficiencies, the German government recommends methods for the disinfection of the masks,, allowing their reuse. The published document contains recommendations for the disinfection of both: colloquially called “surgical” masks and FFP2 and FFP3 masks by using a hot air (65-70°C) for 30 minutes.
This process can be carried out with a standard drying ovens / laboratory sterilizers.
The only places where you cannot re-use a protective equipment (even sanitized) are operating rooms. However for a daily hospital duties or in stationary care, they are ideal.
According to the recommendations of the German government:
MNS masks called “surgical masks”
Purpose: to protect third parties (not the wearer), primarily to protect the patient. These masks are used in most healthcare facilities. In case of external protection in daily work in hospital wards, clinics or care facilities, reuse is possible. Personalized use is required. In case of using in an operating room or in interventional surgery, reuse is generally not possible. Disinfecting the masks is possible by using a dry heat (at 65-70°C for 30 minutes).
Respiratory masks as personal protective equipment, protecting against corona-viruses, with the filter function (masks FFP 2 and FFP 3)
Oposite to the medical face masks, these masks are used to protect the user. These masks are mandatory to protect medical personnel. Disinfecting the masks is possible using dry heat (at 65-70 °C for 30 minutes).
- Sterilisator med fläkt
- Interiör: Rostfritt INOX
- Exteriör: Pulverlackerad strukturfärg eller INOX/G
- Tillgängliga versioner:Smart
- Solid dörr (fönster i dörren är tillval)
- Fläkt
- Värmesystem
- Automatiskt dörrlåsning under program
- Tre färdiga steriliseringsprogram, har totalt 20 programplatser
- Luftvalv stängs automatiskt efter programstart
- Access port, minne för temphistorik, öppen dörr larm, etc.
- Temperaturområde: 5°C över omgivningstemperatur till +250°C
- Volym: 112 liter
- Möjliga tillval, för beskrivning se nedanför.
Options and accessories
Order number: */A | Door with viewing window | |
Order number: */P INOX | Stainless steel wire shelf | |
Order number: */PP | Perforated shelf | |
Order number: */PW | Reinforced shelf | |
Order number: KUW GN*/* | Stainless steel cuvettes | |
Order number: QLK* | Wheels | |
Order number: */S or */S INOX | Table with castors | |
Order number: */ST or */S INOX | Base on castors | |
Order number: OWW/OWW LED | Interior lighting | |
Order number: HEPA | HEPA – clean air filter | |
Order number: OCZ/N | Non-standard access port for external sensor | |
Order numberLabDesk | LabDesk – software | |
Order number: BRT/*/L or IQ/OQ/PQ | Calibration and IQ, OQ, PQ qualification | |
Order number: */3.1 | Over temperature protection 3.1 class according to DIN 12880 |