Himac CT18R – Kylcentrifuger

CT18R – Kylcentrifuger

Artikelnr: CT18R Kategori:

Frågor om Himac CT18R – Kylcentrifuger?

Ring 042-300 91 30 eller maila info@labteamet.com

Beskrivning

Himac CT18R – Kylcentrifuger

Operation Panel has 2 status indicators

Operation Panel has 2 status indicators of images

Power Saving Function (eco indicator)

  • When “eco setting” is enable, if the door is not opened or closed and no operations are performed for 10 minutes, the cooling device is automatically stopped.
    Max. 25% stand-by electricity is reduced, comparing the stand-by electricity without eco setting. (under in-house evaluation) When a user forgets to turn off the main power switch for a long time (such as overnight), stand -by electricity consumption isreduced.
    Set “eco” function and contribute energy saving.

    Power Saving Function of images

    Easy-to-Read Capacitive Touch Panel accepts latex gloves operations.

Actual Run Time (ART Function)

Timer starts counting after the set speed is attained. So acceleration time is excluded from the centrifugation time.You can obtaion higher reproducible centrifugation result with this function.
It easier to obtain more consistent separation results because there is less variation in acceleration times due to different rotors and sample volumes.

Total Run Hours Indication

Total run hours * can be displayed on the operation panel. It is useful as a guideline of the periodical maintenance. * Including acceleration time regardless a setting of the Actual Run Timer

Optional Remote monitoring Sytem himac View

Remote monitoring application “himac View” is available for CT18R, CR30NX and CP-NX series.
”himac View” monitors, operates of start or stops a centrifuge with iPhone ™ or Android ™ Phone via Wi-Fi ®.
“himac View” monitors up tp 16 units of CT18R, CR30NX or CP-NX series in the LAN access network.
* Optional LAN board in CT18R is required to use “himac View”. For more details contact the nearest sales representative.

Optional Remote monitoring Sytem himac View of images

Self-Locking Rotor System

  • Just place a rotor on the drive shaft.
    The rotor is automatically locked by centrifugal force once it starts spinning.
    When the rotor comes to complete stop, the lock is automatically released.

    Self-Locking Rotor System of images


CT18R – Kylcentrifuger

Specifications

Model CT18R
Max. Speed (rpm) 18,000 (T18A41 rotor)
Max.RCF (xg) 31,100 (T18A41 rotor)
Maximum Capacity 1,000mL (250ml x 4 : T5SS31 rotor)
Speed Setting Range (rpm) 300 – 18,000
Timer 1 to 99 min. (in increments of 1 min.) with HOLD function or
1 to 59 sec. with HOLD function
Temperature Setting Range (ºC) -20 to +40
Acceleration/Deceleration Mode Accel: 10 modes, Decel: 10 modes and brake-free
Memory-based programmed operation 99 programs, including 3 direct select buttons
Drive Unit Induction motor (Inverter)
Refrigerator 300W Hermetic compressor (Refrigerant: HFC 134a)
Rotor stop signal Select from 5 melodies, beep and mute
Interface connection LAN X 1 (Option)
Safety functions Door interlock, dual overspeed detector, Rotor ID detector,
imbalance detector, over-temperature detector
Noise level Less than 55dB by fixed angle rotor
Less than 59dB by swinging bucket rotor
Compliance with standard CE, cCSAus *
Heat radiation 650W
Power Requirement (115V -127V model) ±10% 60Hz 15A (ordering number: 915617C3)
(200 – 240V model) ±10% 50Hz 8A (ordering number: 915617C1 and 915617C2 **)
Dimentions (mm) 634 mm (W) X 550 mm (D) X 340 mm (H)
(Height to the table: 291 mm)
Weight (kg) 80
Installation Environment Ambient temperature for operation:2℃ to 40 ℃
Ambient temberature for assuring performance: 15℃ to 25℃

Fixed Angle Rotors

Model Part No. Rotor ID Max. Speed
(rpm)
Max. RCF
(xg)
Nominal Capacity
(pcs x ml)
T18A41 91570000 30 18,000 Out: 31,100
In: 26,400
36 x 2/1.5
18,000 Out: 27,100
In: 22,400
36 x 0.7
15,100 Out: 19,900
In: 16,600
36 x 1/0.5
15,100 Out: 20,800
In: 17,500
36 x 0.5
18,000 Out: 28,500
In: 23,800
36 x 0.5
18,000 Out: 30,100
In: 25,400
36 x 0.4/0.25
18,000 23,200 18 x 0.2
T15A39 91589900 49 15,000 21,500 24 x 2/1.5
15,000 21,500 24 x 0.7
15,000 21,500 24 x 1/0.5
15,000 21,500 24 x 0.5
15,000 21,500 24 x 0.5/0.4
15,000 21,500 24 x 0.4/0.25
T15A46 91583600 39 15,000 22,000 12 x 5 *
Rotor cover is slod separately.
T15A41 91591300 42 15,000 22,260 4 x 50 (TC) or
4 X 15 (TC)
15,000 14,200 4 x 5 *
11,000 11,970 4 x 50 (TC) or
4 X 15 (TC)
T12A41 91570100 20 12,000 18,000 6 x 50 (TC)
10,000 12,200 6 x 15 (TC)
T9A31 91587400 24 9,000 10,600 8 x 50 (TC)
9,000 10,300 8 x 15 (TC)
9,000 9,700 8 x 13
T12A42 91570200 21 12,000 17,100 6 x 80
6 x 70
Produktblad – himac CT18R

LEASING / HYRA / AVBETALNING

Vårt samarbete med Svea gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital. Läs mer om leasing och allriskförsäkring.

Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.

Kontakta oss redan idag för ett förslag!

Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.