Eppendorf Mastercycler® X40 – PCR Thermocycler

Mastercycler X40

Artikelnr: EP-Mastercycler-X40 Kategori:

Frågor om Eppendorf Mastercycler® X40 – PCR Thermocycler?

Ring 042-300 91 30 eller maila info@labteamet.com

Beskrivning

Eppendorf Mastercycler® X40 – PCR Thermocycler

Product Information

Mastercycler X40 combines properties that raise your standard in end-point PCR. Classic features such as a 12-column gradient and excellent block temperature homogeneity are enhanced by an easy, intuitive user interface, a touchscreen and a protective SafeLid to protect your samples from evaporation.

The Eppendorf Mastercycler X40 leads your standard PCR into a new era. Its futuristic design is paired with known quality. The performance of the reliable aluminum block is developed for excellent temperature homogeneity. A 12-column gradient offers fast PCR optimization. Programs from older Mastercycler models can easily be imported. Use the program migration feature to transfer protocols from other cycler models so that you can start right away. All programming is done fast, intuitive, and comfortably via a chemical-resistant glass surface touchscreen and the well-established user interface also used for Mastercycler X50. The handle can be operated with one hand and the SafeLid automatically adapts to apply the perfect pressure on your samples for evaporation protection. No matter if you use 0.1 mL, 0.2 mL tubes and tube strips, or PCR plates. Any type of PCR plate − skirted, semi-skirted and unskirted plates − can be used.

For monitoring and audit trails, you can connect the Mastercycler X40 directly to Visonize LabSuite and by connecting multiple Eppendorf Visionize onboard devices you can transform your lab into a digital lab.

All in a thermal cycler that is only slightly larger than a piece of paper and weighs just 7.25 kg.

Sustainability is a must, therefore the Mastercycler X40 is shipped in a stable, protective cardboard box. The short manual included is enough to start your PCR immediately and the full manual is available as a digital version, accessible via a QR code on the device.

  • End-point PCR
  • Cycle sequencing
  • PCR optimization
  • Incubation
Specifications MC X40
ACT label yes
Thermoblock Aluminum
Sample capacity 96-well plate or 0.1/0.2 mL tubes
Heating technology Three peltier elements
Temperature control mode Fast, Intermediate, Standard, Safe
Temperature control range of the block 4 – 99 °C
Gradient range 1 – 30 °C
Gradient temperature control range 30 – 99 °C
Product type PCR
Heating rate 3.3 °C/s
Cooling rate 1.5 °C/s
Gradient block over 12 columns
Lid descent SafeLid
Lid temperature range 37 – 110 °C
Interfaces Ethernet, USB
Power supply 100 – 240 V, 50 – 60 Hz
Max. power consumption 500 W
Total weight 7.25 kg
Dimensions (W × D × H) 24,5 × 38,5 × 23 cm / 9,7 × 15,2 × 9,1 in
Remote Device Monitoring and Notifications (VisioNize®) VisioNize® touch enabled
Touchscreen Interface yes
Brochure – Master of Class
Brochure – Raise Your Standard
Eppendorf produktkatalog

LEASING / HYRA / AVBETALNING

Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.

Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.

Kontakta oss redan idag för ett förslag!

Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.