Hydrolab – Vattenrening – HLP 30SP
Ring 042-300 91 30 eller maila info@labteamet.com
The HLP demineralizers are the most popular tap water powered devices that meet all the requirements of any modern laboratory in terms of demand for water suitable for analytical and instrumental purposes. Obtained water with conductivity below 0.06 µS/cm meets the requirements of: ISO 3696:1999, ASTM, CLSI, EP. The resulting water can be used for instrumental analysis AAS, ICP / MS, IC, HPLC, GC (depending on the model).
– Fed by tap water.
– Water purification levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.
– Efficiency min. 30-32 dm3/h.
– Membrane pump is included.
– Demineralized water conductivity < 0,06 μS/cm.
– Two independ water intake points:
• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI)
• First purity class (PN-EN ISO 3696:1999, EP).
– Tank 10 dm3.
– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.
– The device works under tap water pressure.
– Fed by tap water.
– Water purification levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.
– Efficiency min. 30-32 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Unattended and automated.
– Equipped with a pump increasing feed water pressure.
– Two independ water intake points:
1. Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) – nozzle reach min. 2 m, equipped with a 10 dm3 pressure tank.
2. First purity class (PN-EN ISO 3696:1999 – with a 0,2μm microfiltration capsule).
– The possibility of installing additional water intake point for general-purpose water (third class (PN-EN ISO 3696:1999)).
– Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
– Optional replacement with a bigger tank (40dm3, 80dm3 and more).
– Automated system shutdown when the tank is full.
– Optional connection to an autoclave, washer machine etc.
– Maintenance procedures may be performed by the user (easy replacement of disposables).
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.
– Can be installed by the user.
– Acid-proof stainless steel (inox) housing.
Dimensions (SxGxW): 235x470x570 mm
Tank 10l: height: 390 mm, diameter: 250 mm
LEASING / HYRA / AVBETALNING
Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.
Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.
LabTeam Scandinavia AB
Vasatorpsvägen 1G
Godsmottagning – LabTeamet
254 57 Helsingborg
Sweden
LEASING / HYRA / AVBETALNING
Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.
ANMÄL DIG TILL VÅRT NYHETSBREV
Din epost (obligatorisk)
Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.
