Hydrolab – Vattenrening – R10

Hydrolab – Vattenrening – R10

Artikelnr: HY-10DR-TOC-00 Kategori:

Frågor om Hydrolab – Vattenrening – R10?

Ring 042-300 91 30 eller maila info@labteamet.com

Beskrivning

Hydrolab – Vattenrening – R10

The R-series demineralizers produce ultra-pure water that meets the requirements of ISO 3696:1999 for first degree water and EP. They have extensive automation enabling monitoring of work at selected stages of transfer, data archiving, individual settings of alarm thresholds, control of the function of flat membrane connections and indication of the content level.

– Fed by tap water.
– Water purification process levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• demineralization on an spectrally clean ion-exchange TOC bed,
• reverse osmosis,
• UV lamp 254 nm,
• microfiltration capsule 0,45/0,2μm.
– Device efficiency min. 10-12 dm3/h.
– Demineralized water conductivity < 0,55 μS/cm.
– Water collection point – first purity class ((PN-EN ISO 3696:1999, ASTM, EP).
– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses.
– System equipped with a 10 dm3 pressure storage tank.
– Automatic ultrapure water recirculation between water collections.
– Fed by cold water: 5-40ºC.
– Power supply: 230V/50Hz.

Technical specification:

– Fed by tap water.
– Purification process stages:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• demineralization on an spectrally clean ion-exchange TOC bed,
• UV lamp 254 nm,
• microfiltration capsule 0,45/0,2µm.
– System efficiency: min. 10 dm3/h.
– Purified water conductivity < 0,055 μS/cm.
– Automated and unattended system performance.
– Water collection point – first purity class (PN-EN ISO 3696:1999, ASTM, FP) compliant with a microfiltration capsule 0,45/0,2µm.
– Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
– The possibility of installing additional water intake point for general-purpose water (third class; PN-EN ISO 3696:1999).
– Equipped with a 10 dm3 pressure tank for third class.
– Can be connected to other devices.
– Automatic shutdown when the tank is full or the filtrate valve is closed.
– Automatic ultrapure water recirculation between water collections (modes: continuous or periodic).
– Maintenance procedures may be performed by the user (easy disposable materials replacement).
– Flow rating of clear water min. 1 l/min.
– Intended to be fed by cold water: 5-400C.
– Installation may be performed by the user.
– Acid-proof stainless steel (inox) housing.
Dimensions: 275x470x570 mm
Tank 10l: h. 390 mm, Ø 250 mm

Hydrolab – Vattenrening – R10
Hydrolab – Produktkatalog

LEASING / HYRA / AVBETALNING

Vårt samarbete med Wasa Kredit gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital.

Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.

Kontakta oss redan idag för ett förslag!

Har du lagt till produkter till ”Mina produkter” så glöm inte skicka iväg din pris- eller produktförfrågan också. Skapa gärna ett konto så sparas alla dina förfrågningarna under ”Mitt konto” sidan.