Beskrivning
Hydrolab – Vattenrening – SPRING 10S
Like the HLP series, SPRING systems produce water with a conductivity below 0.06 µS/cm. These devices are dedicated to more demanding users by equipping the system with extensive automation that enables monitoring of consumables, data archiving, individual setting of alarm thresholds for supply of water parameters, after reverse osmosis and ultra-pure, as well as controlling the function of automatic flushing of membrane modules. The systems are equipped with a number of safeguards enabling comfortable operation of the device.
– Fed by tap water.
– Water purification process levels:
• sediment pre-filter 5µm,
• module A (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ion exchange resin,
• microfiltration capsule 0,45/0,2μm.
– Device efficiency min. 10-12 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Two independ water intake points:
• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
• First purity class (PN-EN ISO 3696:1999, EP).
– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses.
– System equipped with a 10 dm3 pressure storage tank.
– Fed by cold water: 5-40ºC.
– Power supply: 230V/50Hz.
Technical specification:
– The device works under tap water pressure.
– Water purification levels:
• sediment filtration – prefilter 5µm,
• module A (sediment-carbon-softening),
• demineralization on a spectrally clean mixed ion exchange resin,
• cascade microfiltration capsule 0,45/0,2μm.
– Automatic and unattended system operation.
– Equipped with a pump increasing feed water pressure.
– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) – nozzle reach min. 2 m, equipped with a pressure tank.
– System equipped with a 10 dm3 pressure storage tank.
– Optional replacement with a bigger tank (40dm3, 80dm3 and more).
– The possibility of installing additional water intake point for general-purpose water (third class (PN-EN ISO 3696:1999)).
– Automated system shutdown when the tank is full.
– Optional connection to an autoclave, washer machine etc.
– User-performed maintenance procedures (easy disposables replacement).
– Intended to be fed by cold water: 5-400C.
– Energy consumption less than 70W.
– Optional user-performed device installation.
– Power supply: 220-240V/50Hz.
Dimensions (SxGxW): 235x470x570 mm
Tank 10l: height: 390 mm, diameter: 250 mm
LEASING / HYRA / AVBETALNING
Vårt samarbete med Svea gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital. Läs mer om leasing och allriskförsäkring.
Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.
Kontakta oss redan idag för ett förslag!